HT8 Product Menu

Multi Speed Switch

Switch Type:
Operating Speeds:
Drum rpm:

Speed 1 = 2,500
Speed 2 = 2,650
Speed 3 = 2,800
Speed 4 = 3,300

Single Speed Switch

Switch Type:
Operating Speeds:
Drum rpm:

Speed 1 = 3,300

rpm = revolutions per minute

HT8 Drum Floor Sander - Technical



Product Codes

07005 (220/240V Single Speed)
07006 (110/120V Single Speed)

07005MS (220/240V Multi Speed)
07006MS (110/120V Multi Speed)

V = Volts

Power Supply

220/240V 50/60Hz
110/120V 50/60Hz

V = Volts
Hz =  Hertz (unit of frequency)

Off Load Current

220/240V = 5A
110/120V = 8A

A =Amps 
Average Load Current

220/240V = 8A
110/120V = 15A

A =Amps 


95 dBA at 1 meter (3'2")

dBA = decibels

1.60 m/s2 rms

m/s = meters per second, rms = root mean squared

Single Speed - contactor type On/Off with no volt start and overload protection.

Multi Speed - electronic control with 4 operating speeds, no volt start and overload protection, service indicator and power-connected light, fault indicator light.


Continuous heavy-duty AC/DC self cooling 4 brush motor.

AC/DC = Alternating Current/Direct Current 
Motor RPM

Single Speed = 8,500

Multi Speed = 8,500/7,300/6,900/6,500 user selected speeds 4/3/2/1

RPM = revolutions per minute

Mean rpm across voltage range, actual rmp will vary depending on voltage and condition of machine.

Drum RPM

Single Speed = 3,300

Multi Speed = 3,300/2,800/2,650/2,500 user selected speeds 4/3/2/1

RPM = revolutions per minute

Mean rpm across voltage range, actual rmp will vary depending on voltage and condition of machine.

Sanding Drum

203mm (8") wide aluminium extrusion with screw on moulded rubber drum cover with stainless steel backing and 2 screw abrasive clamp bar, dynamically balanced to 0 to 3g (0 to 0.106 oz) tolerance.

g = gram, oz = ounce

Non-slip toothed timing belts and high precision gear cut pulleys.

Dust Pickup

Seated oversize alloy vacuum fan with adustable dust shoe, disposable paper dust bag or cloth bag.

Moving Parts

Sealed for life ball bearings.


High impact injection moulded ABS


495mm (19.5") total length x 203mm (8") wide abrasive sheet with notched and angled ends. Recommended grit P24 to P120. Recommended type aluminium oxide or silicon carbide, backing E or F weight paper, bonding resin over resin with antistatic additives.

Power Cable

7m (23') Non-marking outer insulation.



322mm x 940mm x 855mm
(12.7" x 37" x 33.6")

width x depth x height

Maximum dimensions with handle fully extended and dust bag in operating position.

Weight Net

41.5kg (91.5lbs)


Shipping Weight

50.0kg (110.3lbs)  

Shipping Dimensions

780mm x 400mm x 440mm
(30.75" x 15.75" x 17.5")

width x depth x height
Quantity per Pallet 6 Pallet size 1000mm x 800mm
Warranty 2 years 

See Hiretech Product Warranty


CE (220/240V)
CE (110/120V)
CSA/C US (110V North America)

CE = European Economic Area Manufacturer Certification

CSA/C US = Canadian Standards Association certified for USA and Canada

Power Calculator

Calculator the Power (Watts) of a Hiretech product at different voltages and loads (Amps) based on Ohms Law. Enter the voltage and amps and click 'Calculate'.

Click 'Reset' to clear the result before starting a new calculation. You can enter values in any two fields to calculate the values of the other two empty fields.

Here's the maths.

Voltage (E) = Current (I) * Resitance (R)

Power (Watts) = Current Squared (I2) * Resitance (R)

Power = I * E = E2 / R

Share this page   About sharing


Hiretech Product Warranty

Hiretech warrants to the original purchaser that the Hiretech machine, spare part or consumable (Product) covered by this Warranty is free from defects in workmanship and materials as follows;


Product Description Warranty Period Terms
Machines Floor Sanders
Steam Wallpaper Strippers 
2 years Machines must have been operated and maintained in accordance with Owners Manual & Operating Instructions and for the purpose for which they have been designed for.
Spare Parts & Tools All spare parts and workshop tools for Hiretech machines. Hiretech hand tools. 1 year

No warranty is given for spare parts incorrectly fitted or fitted to machines where the condition of the machine or other parts would cause failure of the spare part fitted.

No warranty is given for spare parts, workshop tools or hand tools not fitted to Hiretech machines or not used for the purpose for which they have been designed for.

Consumables Hiretech floor sander abrasives and disposable paper dust bags. 6 months The product must be in its original unopened packaging or kept in its original packaging in accordance with any instructions given or available on Hiretech web sites.


Should any Product fail in the Warranty Period from the date of the original purchase as a result of a defect, Hiretech will (at it's option) either repair or replace the Product without charge provided that the Product has been operated or used in accordance with the Terms.

Should any such defect arise, please contact Hiretech or your nearest authorised repair agent. The Warranty is 'Return to Base' . The customer must return the Product to Hiretech or an authorised repair agent at the customers cost. Standard service over land mainland freight costs may be refunded on warranty repairs/replacement at the sole discretion of Hiretech or the authorised repair agent. If the Product is not covered under the Warranty the customer will be advised before any action is taken.

This Warranty is the sole warranty by Hiretech and is in lieu of all other warranties expressed or implied and releases Hiretech from all other obligations and liabilities.

This Warranty does not apply to normal wear and tear to the Product , and in particular does not cover normal wear parts such as mains cable, wheels, switches, relays, brushes, rubber parts, hoses, bearings and consumables. This warranty also does not cover, and Hiretech will not be liable for, excessive wear caused by abnormal use.

Hiretech will under no circumstances be liable for alterations to the machine or for damage caused by third persons, or for misuse or abuse of the Product, or damage caused during transportation. Repairs of the Product made or attempted by persons other than those specifically authorised by Hiretech shall render this Warranty void and Hiretech will not be liable for such repairs, the cost of such repairs, or the consequences of such repairs. Where spare parts not purchased from Hiretech are used on a Product and they do not conform to Hiretech specifications, this Warranty will be rendered void and Hiretech will not be liable.

Hiretech will not be liable for any indirect or consequential loss, damage, cost or expense of any kind whatever and however caused whether arising under contract, tort (including negligence) or otherwise including (without limitation) loss of production, loss of profits or contracts or of operating time or goodwill or anticipated savings.


Sharing Hiretech Website Pages & Content

Some of the pages on our site contain a set of links to external social websites. This enables you to share Hiretech web pages and content that you find interesting with your friends and contacts on those external sites.

We are part of the wider web, and many of our visitors and users use social networks and bookmarking services. We want you to be able to share and comment on the content of our website, if you wish to, and these links make that easier.

All of these sites are free to use and require you to register with them. Once you have registered you can begin sharing links.

When you click on an icon (excluding the email icon), you will see a pop-up for the social site. Hiretech will not ask you for any personal information during this process.

Please note, when you click on one of the icon's such as Facebook or Twitter, you will be subject to the terms of use and privacy policy of that website.

Currently, we provide buttons that will help you use two sites - Facebook and Twitter - as well as a share menu '+' that provides access to LinkedIn, Digg, StumbleUpon, Reddit and many other social networks and services.

The email icon will open your email application and allow you to send a link via email to the content your are sharing.

The print icon will print all the content of the page you are on.

For terms governing the use of the Hiretech web site and our privacy policy please visit Terms of Use and Privacy Policy.